Book a Repair
Fast, reliable moving head repair, console repair and effects servicing across the North West and North Wales. Use the form below to book a repair or request a quote.
Contact Details
- Email: info@rcltechrepair.co.uk
- Service Area: North West & North Wales
- Drop-off / Collection: Available on request
- Hours: Mon-Fri, 9am-5pm
Repair Request Form
Why Choose RCL Tech Repair
- Professional moving head, console and effects repair
- PCB-Level diagnostics
- Fast turnaround for venues, hire companies & theatres
- MA, Avolites, Chamsys, Chauvet, Ayrton, Robe and more
Serving the North West & North Wales
Including Northwich, Crewe, Warrington, Chester, Liverpool, Manchester, Wrexham, Llandudno and surrounding areas
Ready to book a repair?
Fill out the form above and I’ll get back to you within 24 hours
Clay Paky Sharpy in for sticking and super slow prism rotation.
Fault traced to a dried‑out bearing on the prism assembly, causing the rotation to drag and stall. Bearing cleaned and regreased to restore smooth movement.
Unit now running correct prism rotation speed.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Luminex GigaSwitch 8 in for multiple damaged RJ45 ports.
Several connectors had physical damage causing unreliable network connections. Faulty ports replaced and all terminations checked for stable link integrity.
Unit now operating correctly across all network outputs.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Chauvet Rogue Outcast 1 BeamWash in for a DMX passthrough fault.
Issue traced to corrosion on the DMX out connector, causing intermittent signal loss through the chain. Connector cleaned and contacts restored.
Unit now passing DMX reliably.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Five ADJ 32 Hex Up units in for temp errors and missing LEDs.
Faults traced to individually failed LEDs, which were replaced. Temperature errors were caused by driver PCBs being installed in the wrong order during a previous repair, preventing correct thermal reporting.
All units now running with full LED output and stable temperature readings.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Avolites Tiger Touch and Tiger Touch Wing in for full service.
Both units stripped for internal clean, fans checked, faders and encoders inspected, and all boards cleared of dust. Firmware confirmed up to date as to what the hardware would allow and all functions tested across both surfaces.
Consoles now running smoothly and ready for show use.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
GLP JDC‑1 in for a missing red segment.
Fault traced to a failed LED driver card and it’s inline fuse that had also blown, preventing the red section from receiving power. Driver card replaced and fuse swapped.
Unit now outputting correctly across all colour segments.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Astera AX3 8‑way charging case in for a charging fault.
One of the charging pins was broken, preventing the affected slot from making contact with the fixture. Pin replaced and alignment checked across the bank.
Case now charging correctly on all positions.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Astera AX3 8‑way charging case in for a charging fault.
One of the charging pins was broken, preventing the affected slot from making contact with the fixture. Pin eventually completely snapped off. Pin replaced.
Case now charging correctly on all positions.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk
Anytronics Quad Pro Dim 2.5 in for no output on channel 4.
Fault traced to a broken wire going into the output socket, causing the channel to drop out. Wire repaired and connection secured.
Unit now outputting correctly on all channels.
#uklightingrepair #eventtechuk #movinglightrepairuk #uklightingtech #stagetechuk